Plastic Water Pet Bottle Stretch Blow Molding Machine

Product Detail

Bottle blowing is a process in which the hollow thermoplastic preform is inflated in a closed mold to make its shape consistent with the shape of the mold cavity. With our JND WATER and JND TECH series Plastic Water Pet Bottle Stretch Blow Molding Machine, you can easily make plastic containers of various shapes. PET bottles produced can be used for: Water, juice, CSD, oil, medicine, cosmetics and other industries.

Product Details

The working principle of the Plastic Water Pet Bottle Stretch Blow Molding Machine is as follows 1. The full-automatic feeding machine will feed the preform to the grab position, and the grab will lower the preform and enter the heating oven through the transmission chain; 2. The preform enters the infrared lamp oven through the transmission chain for heating. 3. The hot bottle preform enters the mold to seal the bottle preform. With the pre blowing gas, the stretching rod at the bottom stretches the bottle preform upward. The pre blowing gas reaches a certain level, blowing at low pressure, and blowing at high pressure. The bottle is molded at one time to complete the bottle blowing. Features 1.Linear structure, modular design, easy maintenance. 2.Man-Machine Interface control panel simplified operation. 3.High pressure air recycle system, which can save about 25% high pressure air, and save investment for low pressure air compressor, reduce energy lost. 4.Stable machine structure, low noise. 5.Drawer mould-fix structure facilitates mould exchange for different bottle shape.Only need 30 minutes to change mould for different bottles with the same neck size. 6.Semi-closed heating structure, even perform heating, low reject rate. 7.Full-electrical system is used in JND WATER & JND TECH series machines, which upgrade 40%~50% production capacity and the energy efficiency. 8.Full-electrical servo structure, precise location, high-speed operation, low energy consumption. 9.Include auto-lubricating device for clamping unit. 10.We use electrical and pneumatic components of world famous brands JNDWATER provide these models of full servo high-speed bottle blowing machines. 1.5500-6000BPH(4 cavities) , 2.8500-9000BPH(6 cavities)，3.12000-13000BPH(9 cavities)，4.17500-18000BPH(10 cavities)

Specifications

Product modelJND-H9

Max container volume2L

Theoretical output12,000~13,000 BPH

Total power69KW

Operating pressure0.7Mpa-1,500 L/min

Blowing pressure3.5Mpa -9,000 L/min

Machine Size(L*H*W)5,350*2,150*2,500 mm

Machine Weight8,000 kg

Key Features

Factory price
Stable performance
advanced technology
perfect function
Easy operation
High intelligence

Shipping Details

We usually use three modes of transportation: sea transportation, air transportation and land transportation. We will discuss with the guests about the specific transportation mode. We provide some services for our guests; 1. After the customer confirms that the product is qualified and the delivery date, we will pack the equipment. At the same time, we can provide customers with packaging related data, and we can also provide customers with booking service. 2. When loading, we will take photos to the guests. 3. JNDWATER will buy insurance for the goods of the guests. 4. Provide the customs clearance information of the goods to the guests. 5. During the transportation of goods, we keep close contact with our guests. 6. If there are guests who are not clear about customs clearance, we can cooperate.