China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img




Application, maintenance and installation of filling machine

by:J&D WATER     2020-03-02
Filling machine filling machine is mainly a small category of products in packaging machine, which can be divided into liquid filling machine, paste filling machine, powder filling machine and particle filling machine from the perspective of material packaging; From the degree of automation of production, it can be divided into semi-automatic filling machine and full-automatic filling production line. Recently, with the QS certification of food, edible oil manufacturers have begun to attach importance to product quality and packaging, so the oil filling machine is highlighted in the filling machine. Application, maintenance and installation 1. Because this filling machine is an automatic machine, the sizes of easy-to-pull bottles, bottle pads and bottle caps are required to be consistent. 2. Before driving, you must first roll the machine with a shaking handle to observe whether the rolling is abnormal, and it is determined that it is normal before driving. 3. When adjusting the machine, the things should be used properly. It is forbidden to use too large things or too hard to disassemble parts to avoid damaging the parts or affecting the performance of the machine. 4. After the machine is adjusted, the loose screw must be tightened. After the machine is rolled with the handle to observe whether the action meets the requirements, you can drive. 5. The machine must be kept clean. It is forbidden to have oil stain, liquid medicine or glass debris on the machine to avoid damage to the machine. Therefore, it must be: (1) during the production process of the machine, timely eradication of liquid medicine or glass debris. (2) before the shift, the machine surface should be cleaned once, and clean lubricating oil should be added to each active part. (3) wipe it once a week, especially wipe or blow it with compressed air where it is not easy to clean in normal use.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...