At four o 'clock in the process of using pure water production equipment failure
At four o 'clock in the process of using pure water production equipment failure 1, high decibel noise main reasons are: pure water production equipment put on shaky;
Compressor operation condition is abnormal;
Raw water is not normal, with no water tower water supply, water gas.
Raw water pipe water, formation pressure pump idling, the pure water production equipment in high decibels of noise.
Aimed at the wrong timing correction or replacement of the original water pipe;
Choose relatively stable environment to put pure water production equipment;
Always maintain compressor, achieve the correct maintenance of compressor;
Water supply device when the water tower, prevent the water a lot of gas.
2, in the leakage is mainly due to the operation there is a leak point in the water.
For the failure to see the water pure water production equipment, find the leakage point;
If it is not easy to find, can use boring tissue detection.
3, low purity of output water quality is mainly high voltage switch or float switch failure, unable to jump back;
Raw water ball valve reverse osmosis membrane filter blocking, lead to damage of electromagnetic valve;
Activated carbon filter blocking;
Pure water production equipment of a series of factors such as input or output voltage is not normal.
4, TDS values on the high side this fault is mainly due to the placement of the water in the water tank for too long;
The rear of the activated carbon without cleaning.
If it is for this reason, to do will in time when the water in the water tank of emissions;
New replacement of activated carbon for cleaning.
All the above is to introduce the content, hope to be of help.
If you want to learn more knowledge, you can visit our website, we will provide you with more professional information.