◇◆ Introduction
Plastic injection machines, also called plastic injection molding machines, or plastic injection moulding machines, is primarily used for manufacturing plastic products.
◇◆ Features
1. Minimized aldehyde content in screw type injection system.
2. Advanced plasticizing technology is adopted.
3. Higher production efficiency for our improvement on injection molding machines.
◇◆ Technical Standards of Plastic Injection Machine
| Model | JND1680 | JND2280 | JND2680 | JND3280 | JND3980 |
| Injection Unit | |||||
| Screw Diameter (mm) | 50 | 60 | 70 | 75 | 80 |
| Screw L/D Ratio (L/D) | 25 | 25 | 25 | 25 | 25 |
| Shot Volume (Theoretical) (cm3) | 491 | 780 | 1100 | 1502 | 1689 |
| Injection Weight (PET) (g) | 520 | 826 | 1166 | 1590 | 1788 |
| Injection Rate (g/s) | 175 | 273 | 380 | 350 | 446 |
| Plasticizing Capacity (g/446s) | 30 | 49 | 60 | 71 | 70 |
| Injection Pressure (Mpa) | 128 | 147 | 147 | 146 | 152 |
| Screw Speed (rpm) | 0-150 | 0-180 | 0-190 | 0-160 | 0-165 |
| Clamping Unit of Plastic Injection Molding Machinery | |||||
| Clamp Force (kn) | 1680 | 2280 | 2680 | 3280 | 3980 |
| Movable Mould-plate Stroke (mm) | 430 | 480 | 550 | 670 | 700 |
| Space between Tie Bars (mm) | 460×460 | 510×510 | 570×570 | 660×660 | 720×720 |
| Max. Mold (mm) | 480 | 550 | 600 | 680 | 800 |
| Min. Mold (mm) | 180 | 200 | 230 | 240 | 280 |
| Ejector Stroke (mm) | 120 | 140 | 150 | 160 | 160 |
| Ejector Force (kN) | 40 | 65 | 65 | 65 | 110 |
| Ejector Number (Piece) | 5 | 9 | 9 | 13 | 13 |
| Others of Plastic Injection Machine | |||||
| Max. Pump Pressure (Mpa) | 16 | 16 | 16 | 16 | 16 |
| Pump Motor Power (kW) | 15 | 22 | 30 | 37 | 37 |
| Heater Power (kW) | 13 | 16.5 | 21.5 | 23.8 | 24.8 |
| Machine Dimension (L×W×H) (m) | 5.0×1.4×2.1 | 6.0×1.4×3.2 | 6.1×1.5×2.2 | 6.9×1.7×2.5 | 7.1×1.9×2.5 |
| Machine Weight s(t) | 5.4 | 6.9 | 8 | 12 | 15.7 |
| Hopper Capacity (L) | 25 | 50 | 50 | 50 | 50 |
| Oil Tank Capacity (L) | 250 | 320 | 580 | 730 | 750 |
All the packing machine ‘s electronic component come from famous manufacturers all over the world ,such as Omron,Siemens and so on.
Product by CE standard.
All the machines are produced by CE standard and we also have CE certificate for all the equipment.
After the machines arrives at the customer's factory, our company can arrange engineers to customer's factory to install and debug the equipment, make the machines run to the best working condition;the engineers also can train customer's staff about how to operation and maintenance of the equipment, customers also can arrange their engineers to study in our factory for free . During the warranty period,we provide the easy damage parts for free.
Copyright © 2018 Shenzhen J&D Drinking Water Equipment Co., Ltd. | All Rights Reserved Design by www.jndwater.com
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
pусский
Français
Español
العربية
