Cans of beverage production line failure phenomenon causes and elimination methods
What beverage cans production line for normal operation?
These problems become more important cans beverage production line to use knowledge, then tell you simple cans beverage production line failure phenomenon causes and elimination methods.
Appeared one, fault phenomenon: after startup, controller of LCD screen no show.
The cause of the problem: if there is a electric power socket;
Whether the power plug fall off;
The fuse loose or fuse.
Troubleshooting: insert the plug again;
To install or replace the fuse;
Pay attention to the fuse need in accordance with the requirements of the specification book to choose.
Note: need to check and confirm what is the cause of burn out the fuse.
Second, the failure phenomenon: pump wheel rolling, but cannot delivery of liquid.
The cause of the problem: hose not pressure in place;
Hose damage leakage.
Troubleshooting: adjust the adjusting screw pump head cover;
Replace the new hose.
Three, fault phenomenon: hose while working with roller slide to one side.
The cause of the problem: the hose is not fixed.
Troubleshooting: connect the hose with a tee and hung on the fixed screw or tube kaka.
Four, fault phenomenon: after boot, appear screen appears correct, and instructions are in operation, but not turn pump impeller.
The cause of the problem: the pump head roller is jammed;
No stop bottle filling line not connected or not right level;
Driver circuit board.
Troubleshooting: the pump head installed as required;
There can be no stop bottle filling line connected and level is correct;
Check the PCB problem.
Note: maintenance, circuit board is repaired by supplier or company is better.
All the above is to introduce the content, hope to be of help.
If you want to learn more knowledge, you can visit our website, we will provide you with more professional information.