Equipment performance and technical index of aseptic filling machine
https://www . jndwater.
The main content that com machinery shares for you today is: the performance and technical indicators of aseptic filling machine equipment. The first is whether the material cylinder is in the center of the material cylinder bracket, if there is any change in the material cylinder, please install the position from the beginning;
The second is whether there is any damage to the O-ring of the piston of the material cylinder. If there is any damage, please replace it.
The third is that the piston of the material cylinder and the piston rod may be fastened, and if there is any looseness, they should be locked;
Beverage aseptic filling machine due to the variety of products produced, however, if there is a failure in the production, it will bring the production can not be underestimated.
Therefore, enterprises should know more about the possible situation of machinery and how to deal with it.
It can ensure that the filling machine is more efficient, high-quality and low-cost to complete production. The following is https://www . jndwater.
Com machinery summarizes common faults for your reference: the filling quantity of the filling machine is not accurate or out of material. If the opening is delayed, the throttle valve of the thin cylinder needs to be adjusted;
Quick three-way control valve in up and down tightening spiral spring of stretch blowing irrigation spin one equipment stretch is too large check valve will can't open;
Whether the filling speed is too fast, adjust the filling speed throttle valve to reduce the filling speed;
Whether the speed throttle valve and the filling interval throttle valve are closed or not, the throttle valve cannot be closed;
If there is any foreign matter in the quick-fitting three-way control valve, please sort it out. If there is air in the quick-fitting three-way control valve and the leather tube of the filling head, if there is air, try to reduce or remove the air;
Check whether all sealing rings are damaged. If there is any damage, please replace them with new ones;
Filling, whether the nozzle valve core has a card plug appearance or delayed opening, if there is a card plug, the valve core should be installed from the beginning.
Can all clamps and leather tube buckles be sealed well, please correct if any;
The magnetic switch is not loose, please lock it after each adjustment.
The piston of the filling machine's material cylinder will not come back after the top, push it to the position of the magnetic switch, and press the emergency stop switch to adjust the movable magnetic switch from the beginning.
In recent years, with the improvement of people's living standards, the demand for beverages is strong, which makes the beverage industry develop rapidly.
In order to pursue low cost and high efficiency, many beverage factories continue to expand their production scale, and beverage machinery and equipment are developing towards large-scale, continuous and automated production.
On the other hand, according to the diversified needs of the market, especially the seasonal characteristics of some agricultural and sideline products processing, the equipment is required to adapt to multi-purpose production in order to establish a production system with multiple varieties, a small amount and economic benefits. Therefore, as the basic operation in beverage processing---
The plate heat exchanger used for heating, sterilization and cooling should also be suitable for multi-variety and small-batch production. It should not only be able to heat treat various physical materials, but also be able to process seasonal products.
This not only expands the application range, but also improves the operation efficiency.
Due to the increasing complexity of beverage processing, it is necessary to design and manufacture heat exchange equipment according to the industry's own production characteristics. While the production equipment is in operation, attention should be paid to prevent the adhesion of pot scale, and take effective cleaning, sterilization and other basic measures to control microbial reproduction. Please click on our official website for more information! https://www . jndwater.
Com machinery is a liquid sand blasting factory with quantitative filling technology as its core and is committed to digital intelligent manufacturing of filling equipment. https://www . jndwater.
Com has always been committed to the research and development of high and new technologies with advanced technology and unique comprehensive strength of software and hardware.
The leading business covers box bag filling machine, aseptic filling machine, tube sterilization machine, automatic box bag filling machine, automatic filling machine production line, pasteurization machine, etc. , suitable for filling various types of BIB bags, various specifications of sterile bags, large liquid bags and box bags of various specifications.