China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img




Glass laser marking machine

by:J&D WATER     2020-03-16
A new technology to make use of a letter from the type of CO2 laser marking machine directly on the glass with clear-cut quality mark, this is a kind of can replace the expensive solid laser marking method and the traditional glass technology ( 25 wco2 laser marking machine can meet the need of most on the glass) 。 CO2 laser by breaking the glass on the glass surface, thus appears a certain number of cracks in the glass is allowed, but excessive crack can lead to potential weak, mark is not clear, strength of materials is more serious is that make the substrate becomes loose. Precise control in the process of marking materials of crack can avoid these problems. There are three methods can be used to control cracking on the surface of glass type and quantity: in the first. One way is to use multiple laser radiation; The second method is to use discrete points to form annular crack; The third method is to produce crack surface crack. Using a laser radiation can be visible on the glass to produce a clear-cut mark, but the direction of the crack and stress pattern will extend in the direction perpendicular to the laser mobile. Tag printing and even a few days later, after a short time these cracks in vertical direction of laser movement will form a new crack, extension to the original mark near the outside area formed fragments, thus affect the clarity of the tag. Using multiple laser radiation, with mark area adjacent area through heat conduction is heated, so that these regional formation stress gradient, reduce the possibility of a second burst. In this way on the soda-lime glass and boron silicate glass is very effective. A laser radiation on the fused silica glass and quartz glass is more effective, because these two kinds of material expansion coefficient is very low. The second method is to use a series of circumferential crack forming words, shape, a square or rectangular bar code and other code design. Glass by heating and cooling cycle from low density ring crack. Glass caused expanding extrusion materials around, heating when the temperature rises to the glass to softening point temperature, the rapid expansion of glass to form a bulge on the surface of the glass dome of low density materials. After heating glass contraction to the surface of the initial position, but the relaxation time is the low density of the formation time, make its cannot recover to the softening temperature before starting position. Use three different mark method using CO2 laser marking machine on the glass, namely through multiple laser; Discrete points to form annular cracks and cracks of surface crack. Because of the light energy is gaussian distribution, so the spot center at higher temperature. When the high return to starting position, close to the center of the circular crack in this area. Formed in the low density area and standard density area between the joint form stable circular crack. This method is suitable for the ordinary optical materials reinforced glass and tempered glass, chemistry or normal sodium calcium on float glass standard. Laser industry application solutions and the third way is using the same heating and cooling process, is to make a specific volume of the surface of the glass. But the third method used light spot size is larger, the joint density of two area boundary annular crack method did not clear. Marks caused by this method can not immediately visible, requirements after a little pressure to lattice cracks along the laser marking area. With no fragments produced by cracking stripe filling design form text, graphics, and all kinds of code. Because this approach requires surface of pure quality, with high quality auto glass so can print out the clear mark. Laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. 【 Semiconductor laser marking machine 】 Stable performance, price moderate 【 Green laser marking machine 】 High prices, product customization is given priority to YAG laser marking machine 】 Metal, plastic and other products used for moderate price more metal laser marking equipment glass laser marking machines, laser marking machine laser marking on the glass
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...