Introduction of bottle blow molding machine JND-90:
jndwater semi-auto stretch blow molding machine is specially designed to produce 1 gallon and 2 gallon and 3 gallon bottle and 25L wide mouth jar. Its max output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
Suit bottle size: 3 gallon to 6 gallon .
Suit bottle material: PET
Blowing speed :90bph-120bph.
This blow machine also can use for 3-10L PET bottle .
ShenZhen J&D Drinking Water Equipment Co.,Ltd.’s JND-90 bottle making machine consists of main unit and rotary infrared heater.The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
Main Technical Standards of Bottle Blow Moulding Machine JND-90:
Specification
General Information | JND-90 |
Clamping Force | 30T |
Clamping Stroke | 330mm |
Max. Stretching Stroke | 450mm |
Number of Cavities | 1 Cavity |
Theoretical Output | 90BPH |
Max. Mould Thickness | 380mm |
Space Between Tie Bars | 480*550mm |
Electrical System |
|
Voltage Standard | AC 380V/50HZ |
Number of Heating Zone | 2 Sections |
Total Power(Full Loaded) | 15kw |
Container | |
Max. Container Volume | 25L |
Neck Diameter Range | 65mm |
Max. Container Diameter | 330mm |
Max. Container Height | 550mm |
Auxiliary System | |
Low Air compressor | 8-10Bar |
High Air compressor | 30Bar |
Air Dryer | 2.0/30 |
Dimension & Weight (L×W×H) | |
Blow molding machine | 1550*820*2000mm |
Preform Autoloader | 2520*680*1550mm |
Net Weight | 1.4Ton |
Electronic Component come from famous manufacturers all over the world ,such as Omron,Siemens and so on.
Product by CE standard.
Stainless steel 304
All the machines are produced by CE standard and we also have CE certificate for all the equipment.
After the machines arrives at the customer's factory, our company can arrange engineers to customer's factory to install and debug the equipment, make the machines run to the best working condition;the engineers also can train customer's staff about how to operation and maintenance of the equipment, customers also can arrange their engineers to study in our factory for free . During the warranty period,we provide the easy damage parts for free.
Copyright © 2018 Shenzhen J&D Drinking Water Equipment Co., Ltd. | All Rights Reserved Design by www.jndwater.com
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist