Laser marking machine should be placed in a dry, clean and ventilated place, should be far away from the main transport workers commuting and workpiece.
This is because, drying is to prevent short circuit, laser marking machine electrical part of be affected with damp be affected with damp is clean to prevent laser marking machine computer parts of the circuit for high voltage electrostatic dust, damage to the computer, another is to prevent the memory chips dust affects normal data read and can't boot, and all kinds of processing fine dust into the circuit to produce electrical fault and so on, the ventilation is in order to improve the work efficiency of chillers, maintain long-term stability module in constant temperature environment to work properly, away from the main part is because the light path of value accounts for most of the laser marking machine, and protruding from the optical path is partly, pedestrians and traffic to and fro to increase the likelihood of out of the light path is collision.
Laser marking machine wiring should not touch.
Unless to give force to the location of laser marking machine to replace, or of the usual operational personnel should not move the laser marking machine wiring.
If you want to move, move before should be in accordance with the provisions, turn off all the power and accurately record all wiring installation position and the method, how to remove the, how to install, don't do any changes.
Unless the manufacturer authorization, laser marking parameters should not make any changes.
Laser marking laser marking software interface parameters are used to regulation, and the definition and fixed laser galvanometer scanning movement characteristics.
If change, can cause consequences such as the laser path distortion.
Under normal circumstances, it is recommended that the factory after installation and debugging, the relevant parameters in transcribing and keep for a long time, under the guidance of the management personnel for computer poisoning system reinstall.
Work, laser marking machine shell could be generating electrostatic accumulation, can bring inconvenience to the operator, so the plug to ground.
To prevent suddenly loses power, which is usually caused by poor contact with plug, and prevent sudden high current circuits of the impact on the laser marking machine, proposed to the laser marking machine when the power supply is connected through a circuit breaker.
To prevent lightning damage, thunder explodes the weather should turn off the laser marking machine, and cut off power supply.
Laser marking machine is a fully integrated optics, electronics, electrical, computer, machinery five technology in the field of precision equipment, and shall be in strict accordance with the provisions of the operation, in order to the safety of the equipment and operating personnel, any changes and changes should be through the factory technical personnel's permission in advance before execution.
Laser marking equipment recommended: preferential deals offer 4007001618 【
Optical fiber laser marking equipment 】
Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material;
CO2 laser marking equipment 】
Non-metallic products used for the laser marking purposes;
Uv laser marking equipment 】
Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes;
Metal laser marking equipment 】
Based on customer specific products, production line, the demand for design and production and customer demand, customized models.
More metal laser marking machine laser marking equipment