China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img



desk top type water dispenser

Laser marking machine series, matters needing attention and maintenance

by:J&D WATER     2020-03-21
A, laser marking equipment considerations a. The work environment ( Room temperature) Temperature in 18 ْ C - 28ْC ( 25 ْ C plus) b。 It is strictly prohibited to no water or loop not normally start the laser power and Q drive c. The abnormal phenomenon, the first shut down power supply, laser power and galvanometer check e again. Don't allow in krypton lamp lit before the other components, in case of high pressure into the damaged components f. Do not allow the laser power output ( Anode) Impending, to prevent light and other electrical appliances, breakdown g. Keep circulating water clean, clean water tank and replace pure water on a regular basis. Second, the laser marking equipment clean a lens. Circulating water quality and water temperature directly affects the service life of laser power and laser, require the user to use to ion high purity pure water, and subject to inspection, and to control the water temperature 24 ℃; Upper and lower temperature control in 1 ℃. B, cleaning, water tank, and circulating water replacement: first shut the machine power supply, open the tank plate 'outlet', after the water tank clean; Unwrapped filter at the same time, to remove the stain on the filter, ensure clean, good connection of each joint, replacement of circulating water. 2 - and run 3 minutes ( Make laser circulating water) 。 C, the lens cleaning ( Advice before work every day, clean equipment must be in a state of shutdown) Focusing on the cleaning of the lens: focus lens from frame light spin down, bend the lens wiping paper into several fold, with wet cleaning fluid, gently rub the lens surface with wet lens paper repeated several times, until the mirror is clean, no dust and oil on the surface of the lens. Laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. More metal laser marking equipment, laser marking machine marking machine maintenance
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...