China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

 

 +86-0755-88321071

 +86-13823281855
Coding machines & ink jet printers

Laser marking machine start on testing process

by:J&D WATER     2020-03-25
Laser marking machine starts a boot process, start-up step (1) through to external power source. (2) open the equipment main box total power switch, check whether the water, water temperature is normal. 3. Restart the computer and enter the everbright laser marking system. (4) open the laser power supply main switch and Q drive power supply switch. ( Attach the control panel) M1: frequency modulation laser control mode, applicable to the guide pillar, blunt needle, template M2: don't take the first pulse suppression, use less M3: according to the continuous output light signal, suitable for independent guide column T - attendance On: forced out of the light, according to the output laser T - setting mode Off: the lock off. ( To go through any pattern) RUN: running state, by computer control signal output laser INNER: internal control methods ( Has been set, switch, please to pull this location) Knob: rate ( White body with 200 - 5 k, the range is about 3 k; 5 - playing black body Around 50 k, range 14 k) 5, when the laser power supply READY when the light is bright, according to the laser power supply the RUN button to light laser krypton lamp ( When the current display is 6. 5 a to adjust the current blackbody around 12 a, white body around 10 a) 6. Open the power switch on the main box galvanometer. All landowners to graphics, set each parameter. Was adjusted the focus, infrared marking position, begin to work. Flow chart: through to outside POWER supply source to the total POWER switch POWER restart the computer to enter the cursor system - the laser POWER switch POWER and Q drive switch POWER ( Panel specification table) And laser power supply READY when the light is according to the current RUN to 6. 5 a to adjust current ( 12 a blackbody, white body 10 a) To master power switch box galvanometer, transferred to graphics, setting parameters to tune the focal length, infrared point correction, work, shutdown step 1, adjust the current minimum, according to the laser power supply STOP button, krypton lamp out. 2, close the galvanometer power switch. 3, close the Q drive, laser power supply switch. 4, exit everbright program and turn off the computer. 5, close the master switch, cut off the power supply source. Flow chart: adjusting the current minimum, press the STOP button, put out the krypton lamp - galvanometer power - Q drive to laser power supply, exit the everbright program, shut the computer to master switch, cut off outside the normal maintenance of the power supply source laser marking machine 1, keep the water clean: average once every 20 days in water, in water before have to clean the water tank ( This machine use deionized water, distilled water, drinking water) 2, boot must check whether the water flow is normal. ( Pipe cannot have were broken and leaking can be interface) 3, circulating water in a certain temperature range. ( General Settings between 24 ℃ ~ 26 ℃, the indoor temperature at 30 ℃) Closed Q switch with 4, laser, crystal surface, a beam expander, a focusing lens must be cleaned regularly. ( Every other month or cotton ball on a little cleaning fluid with lens paper to wipe, wipe not too hard) when the 5, master the laser marking machine the right operation method. 6, after the use, in a timely manner to the clean, sorting of workbench face. Optical fiber laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. 【 Semiconductor laser marking machine 】 Stable performance, price moderate 【 Green laser marking machine 】 High prices, product customization is given priority to YAG laser marking machine 】 Metal, plastic and other products used for moderate price more fiber laser marking equipment, laser marking machine marking machine inspection marking machine marking machine boot
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...