China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img

 

 +86-0755-88321071

 +86-13823281855
desk top type water dispenser

Laser marking machine system parameter setting method steps tutorial

by:J&D WATER     2020-02-18
Due to its excellent performance, laser marking machine has been selected by more and more customers. When using laser marking machine, many people have a vague concept about parameter setting, today, the laser editor will explain in detail the parameter setting of a laser marking machine: first, the laser parameter is still set once, but the cross-line filling method is equivalent to laser carving twice. The reference parameters are as follows: a): Marking frequency (frequency) Set as low frequency, laser coding machine according to the different forms of identification, laser coding equipment can be divided into two types: scribing type and dot matrix type. At present, most of the laser marking equipment in the market is scribed, while the new laser marking equipment adopts the new dot matrix technology-Lattice resident technology. Laser marking machines use laser beams to permanently mark the surfaces of various substances. Laser marking machine can be divided into CO2 laser marking machine, semiconductor laser marking machine, YAG laser marking machine and fiber laser marking machine according to different lasers. The computer control system is the center of the control and command of the whole laser marking machine, and it is also the carrier of software installation. B: the launch time is 1. 5us. C: filling method: Bow filling, spacing: 0. 01-0. Between 05mm. D: scanning speed: depending on the situation (Condition) However, if the border effect of laser carving always has burrs, the speed value can be set to a smaller point. Recommendation: 200-Between 1500. Secondly: Single line filling is used, but the parameters are set twice. The marking machine marks a permanent mark that cannot be erased. It is directly vaporized on the surface of the object by laser, and can be distinguished by naked eyes without any auxiliary tools, which is convenient for consumers to identify. Therefore, in the case of the same energy, the new laser marking machine printing speed is faster. The launch time is 1. 5. 1st times: power ( Refers to the amount of work done by an object in unit time)Slightly higher frequency (frequency)Slightly higher (For example, 30000-70000)Slow Down (For example, 700-1000), At this time the product (Product) There is still a little residual paint after the laser carving on the surface, so the parameters need to be set 2nd times more. 2nd times: power ( Refers to the amount of work done by an object in unit time)Slightly lower frequency (frequency)Slightly lower (For example, 8000-20000)Hurry up (For example, 1000-1600)3. Products (Product)The material is (Transparent plastic (Related things: plastic)Material), Laser marking machine intermediate printing (White)Surface spray (Black ink) , The effect of laser carving should be white, and the edge should not leak light. The parameters are as follows: a: marking frequency (frequency)Set to high frequency (For example, 50000-100000) Page 1st B: Launch Time: Set a large point. For example: 35us c: filling method: generally, it is a single line filling. If it is not white enough, it can be filled with cross lines. Laser marking machines use laser beams to permanently mark the surfaces of various substances. Laser marking machine can be divided into CO2 laser marking machine, semiconductor laser marking machine, YAG laser marking machine and fiber laser marking machine according to different lasers. The computer control system is the center of the control and command of the whole laser marking machine, and it is also the carrier of software installation. The laser coding machine is mainly to completely depict the trajectory of the characters to be marked, while the dot matrix laser machine is to depict some important trajectory points of the characters to be marked.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...