Advent Of The State-of-the-Art Bottle Blow Molding Machine

16-12-2021

Prior to 12th March 1894, the Coca-Cola Company was losing thousands of dollars to the very fast rate of expiration and contamination of the Coca-Cola drink, and the company, which was fast-rising and gaining worldwide appeal at the time, suddenly stood at the brink of real collapse.

As this threat became realer and realer by the day, the then owner of the company, Asa Candler, knew he had to act fast if he was going to rescue his young but promising enterprise from falling apart before it's even had a chance to fully lift off. All efforts kept proving abortive however, until a few years later, right at the very edge of extermination, when Asa Candler was approached by two young entrepreneurs from Chattanooga, Tennessee. These men, named Benjamin F. Thomas and Joseph B. Whitehead, claimed to know a secret technique that Candler could use to prevent the Coca-Cola drinks from early contamination and expiration, thereby redeeming the brand from what seemed a certain collapse.

Needless to say that Candler was eager to know this technique, so eager in fact that he signed away a contract with the two men that he would come to regret dearly in the years that followed. But what was this secret technique, and did it work? The technique the two men gave Candler was simple: bottle it! And did it work? By 12th September 1919, some 25-odd years later, that little drink enterprise that Candler acquired for an estimated total investment outlay of a measly $2300, was sold to a group of investors for a whopping $25million, and was selling 500,000 shares of the company to the public at $40 per share! That meant that the new owners were able to generate revenue of over $20million in just a few months! Needless to say that those two young entrepreneurs from Chattanooga, Tennessee, became millionaires in their own rights too, as the entire success of the Coca-Cola product was only possible because they'd come up with the idea of bottling and were being paid $1 for every bottle of Coca-Cola produced!

Today, the 'bottle technique' is used in the production of everyday products like mineral water, juice, cosmetics, medicine, edible oils, alcohol, carbonated drinks, pesticides and jars. Bottles have steadily become an indispensable element of a number of very fast-growing markets, thereby increasing the need for fast, efficient, high-quality and high-tech Bottle Blowing and Molding Machines, to effectively produce these bottles in very large quantities and according to trending and more popular designs and specifications, to try and meet the ever-growing need for bottles by thousands of established companies worldwide.

These bottle blow molding machines, like most state-of-the-art, technological equipment, are produced under the strictest management possible, with the use of very advanced production equipment, and under very stringent quality-control procedures.

bottle blow molding machine

They are widely used in the production of a variety of PET plastic containers and bottles for mineral water, beverages, oils, cosmetic and hot fusions etc.

Connected to, and controlled by micro-computers, with each main process fitted with the safety capacity of Self-locking, they mostly require ONLY one operator, as total production can be completed automatically. The wide range of utilization and reliable performance plus output, have made the machines quite popular with a number of leading bottle manufacturers worldwide.

One of the biggest advantages of these machines is energy-saving. With the adoption of high-pressure clamping, they can make self-adjustments to constantly match the varying levels of pressure usually needed during production, thereby ensuring a super-clamping force is maintained throughout the entire production process. This means that Mold Sealing is completed under a 100% air-tightness condition before blowing, and this prevents air and energy loss due to incomplete air-tightness. With such control over air energy and power, lower costs and unbeatable efficiency are the results achieved.

Most leading bottle manufacturers in the world today have embraced this technology to successfully grow and scale their businesses. If you wish to join this elite class, then we're only too happy to help! As a leading company in technological equipment, feel free to contact us via our website for any enquiries.

Also, for more information, to view our wide range of premium products, or simply to place an order, please kindly contact us immediately.

any more information , pls feel free to contact info@jndwater.com, we will reply you soon and also welcome to visit us.

 Characteristics And Uses Of Beer Filling Machine

Characteristics And Uses Of Beer Filling Machine

View More
Principle And Maintenance Tips of Oil Filling Machine

Principle And Maintenance Tips of Oil Filling Machine

View More
Question To Consider Before Purchasing Water Filling Machine

Question To Consider Before Purchasing Water Filling Machine

View More
Why You Need A Liquid Filling Machine

Why You Need A Liquid Filling Machine

View More
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message