JND WATER & JND TECH bottled water filling equipment adopts automatic program control, and its working process is as follows: 1. Wash the bottle: The bottle washing goes through five stations, the first station is washed and disinfected with CLO2, the flushing time is adjustable, the first station time is 12S, the second station is 12S, the third station is 12S, and the fourth station is Pure water cleaning, the time can be adjusted according to different needs, the fifth station is to dry the residual water in the rinsed bucket. 2. Filling: The clean barrels are transported by the chain conveying mechanism and fall on the barrel holding mechanism. The barrel holding mechanism straightens the empty barrels, presses the filling valve to the right, and starts filling. The filling time can be adjusted according to the flow rate of the filling pump. 3. Gland When the filling is completed, the bucket transmission mechanism sends the bucket filled with water to the cover of the capping machine. When the covered bucket is transferred to the capping mechanism, the capping cylinder presses the bottle cap tightly. The cycle is complete.