China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img



desk top type water dispenser

Pneumatic marking machine daily maintenance and cleaning techniques

by:J&D WATER     2020-03-30
Marking needle sometimes impact sometimes don't impact, signet of characters is incomplete, 1) Gas circuit and electromagnetic valve with more water, or electromagnetic valve with sundry. Clear away the water in the gas path, air compressor also regularly drain ( At least once a month) 。 Remove impurities and add some grease in solenoid valve. ( 2) Marking needle set inside - Set inside and marking marking needle) between Have dirt, clean with kerosene and marking marking needle, and then set inside or marking to the needle with a small amount ( Random matching) Special lubricating oil or grease of white. ( 3) Marking the needle in the copper and marking at the top of head inside & quot; O' Type rubber sealing ring is bad contact, adjust the length of the spring replacement & quot; O' Ring, reshipment & quot; O' Ring. ( 4) Gas path blockage or trachea caused bending gas flow is not enough, marking the beginning of deep, light or later marking needle don't impact later. Check the gas path eliminate congestion or bending. ( 5) Coordinates of the characters set unreasonable, so pull over part cause strokes are not impressed, please adjust the peripheral coordinates of the characters. ( 6) The cause of the computer. A,, turn off the computer to restart. B, close other programs such as music players, etc. ; C, marking machine work not in screen saver mode. Pneumatic marking machine to good job in daily work, and it must be the points: 1. And marking needle set of maintenance: maintenance will be printed when the needle from the needle, use gasoline to clean them, dry after adding suitable amount of lubricating oil, to reload. The work according to the user using the device's frequency, suggest two to three times a week. 2. Marking head of maintenance, regular use gasoline cleaning guide rail, dry after adding suitable amount of lubricating oil, the work suggested that once every two weeks. At the same time pay attention to in the process of cleaning refueling should be filled with to avoid the oil to the synchronous belt. 3. Controller maintenance: the controller is switched off, open the enclosure cover, with a clean friendly air will internal dust blowing clean can. At ordinary times should also pay more attention to the case of external dust prevention work. 4. Computer maintenance, computer running time is long, in the internal system also produces a lot of junk files, such as not clear will directly affect the normal operation of the software. Laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. 【 Semiconductor laser marking machine 】 Stable performance, price moderate 【 Green laser marking machine 】 High prices, product customization is given priority to YAG laser marking machine 】 Metal, plastic and other products used for moderate price more metal laser marking equipment pneumatic marking machine
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...