JND WATER & JND TECH Semi Auto 3-6 Gallon Bottle Blow Molding Machine JND WATER & JND TECH Semi Auto 3-6 Gallon Bottle Blow Molding Machine

JND WATER & JND TECH series equipment semi-auto stretch blow molding machine is specially designed to produce 3-6 gallon bottle and 25L wide mouth jar. Its max output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.

Share this:

Application&Feature

Application:

JND WATER & JND TECH series equipment semi-auto stretch blow molding machine is specially designed to produce 3-6 gallon bottle and 25L wide mouth jar. Its max output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.

JND-90 consists of main unit and rotary infrared heater.The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.

What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure

Features:

The biggest advantage of the blow molding machine is energy saving. Adopting high pressure clamping, JND automatic stretch blow molding machine makes self-adjustment in accordance with the different pressure needed during production, thus ensuring the super clamping force. While the high pressure sealing system with automatic adjustment permits that mold sealing is under condition of 100% air tightness before blowing, and avoid air energy loss owing to incomplete air tightness. With such effective control over air energy and power, lower costs and improved efficiency are achieved.

Date Information:

 

General Information

JND-90

Theoretical Output

90

Electrical System

Voltage Standard

380v/3PH/50Hz or special order

Total Power (Full Loaded)

69KW

Container

Max. Container Volume

3-6 GAL

Neck Diameter Range

65mm

Max. Container Diameter

330mm

Max. Container Height

550mm

Bottle Material

PET,PP,HDPE

Production Details

   Bottle Mold  
Preform
Finished Product

 

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message