Plastic Injection Stretch Blowing PP bottle Blow Molding Machine Plastic Injection Stretch Blowing PP bottle Blow Molding Machine

JND WATER & JND TECH series equipment Plastic Injection Stretch Blowing PP bottle Blow Molding Machine is widely used to produce varieties of PET plastic container and package for mineral water, beverage, oil, cosmetic and hot infusion, etc.

Share this:

Application&Feature

Application:

JND WATER & JND TECH series equipment Plastic Injection Stretch Blowing PP bottle Blow Molding Machine Blow Molding Machine is widely used to produce varieties of PET plastic container and package for mineral water, beverage, oil, cosmetic and hot infusion, etc.

Controlled by micro-computer with each main process fitted with safety of self-locking, it only needs one worker to operate and the total production is completed automatically. Its wide utilization and reliable performance make it become popular and attractive to all bottle manufacturers.

Features:

The biggest advantage of the blow molding machine is energy saving. Adopting high pressure clamping, JND automatic stretch blow molding machine makes self-adjustment in accordance with the different pressure needed during production, thus ensuring the super clamping force. While the high pressure sealing system with automatic adjustment permits that mold sealing is under condition of 100% air tightness before blowing, and avoid air energy loss owing to incomplete air tightness. With such effective control over air energy and power, lower costs and improved efficiency are achieved.

1.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

2.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

3.Contamination is avoided for the bottle body.

4.Ideal effect of the chilling with the chilling system.

5.Easy installation and starting

6.Low rejection rate: less than 0.2 percent.
 

Date Information:

 

General Information

JND-H4

Theoretical Output

7200BPH

Electrical System

Voltage Standard

380v/3PH/50Hz or special order

Total Power (Full Loaded)

69KW

Container

Max. Container Volume

2L-3L

Neck Diameter Range

26/30mm,16-38mm

Max. Container Diameter

110mm,100mm

Max. Container Height

360mm,380

Bottle Material

PET,PP,HDPE

Production Details

Stable performance with advanced PLC

Conveying preforms automatically with conveyor

Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
Strong clamping force with high pressure and double crank links to lock the mold.
Two ways of operating: automatic and manual.

 

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message