Say about filling machine maintenance of common sense
Say about filling machine maintenance of common sense. 1, installation and debugging.
Before debugging, read the instructions carefully, ready to use the tool.
2, filling head fluid in a quantitative, the fluid volume adjustment nut tighten, hood filling head shell, loosen the filling rack support plate.
3, filling rack is supported on a support plate, filling head positioning to finger push up.
Locating sleeve flexible should be able to move up and down, can open needle or back filling needle, unhindered.
4, filling the container insert tool box, connected to the power converter.
Take power socket needs to be reliable grounding line of the tripod socket, in case of casing leak and the impact.
If the machine power switch, the power light is lit up.
5, at the bottom of the storage tank switch installed in the open position, so the material can flow metering pump.
According to each container filling amount, adjust the screw on the crank.
The filling speed adjustment plate knob is about 20 degrees, put the switch on the filling speed adjustment plate in open position.
6, bottle filling machine, bottle brush machine, bottle machine installed and bottling track and bottle connection plate adjustment to horizontal, liquid storage barrel filled with material, all electrical switch in the closed position.
All the above is to introduce the content, hope to be of help.
If you want to learn more knowledge, you can visit our website, we will provide you with more professional information.