China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

 

 +86-0755-88321071

 +86-13823281855
Coding machines & ink jet printers

The common problems in laser marking machine debugging

by:J&D WATER     2020-03-25
Optical fiber laser marking machine is mainly composed of laser, vibration lens, marking card of three parts, the production of laser marking machine, fiber laser beam quality is good, the output center is 1064 nm, the whole life in 100000 hours, here is the common problems in laser marking machine debugging 1, open lid laser, to adjust the red light indicator. To ensure that the red light in adjust the red light on the front end plate round hole is center. Regulate the way is: first show near the front plate, the red light conditioners rack up and down and control knob, make red light on the front board of the round hole center; And then, after the red light is near the end plate, conditioners frame around the pitch and behind the set button. Repeated the above operation until the red light collimation. 2, in the output mirror, semiconductor module, the center of the mirror, make them all with red light. 3, according to the steps to boot, boot off Q drive power supply, which results in the laser light. 4, turn fluorescence in the output mirror front end, increase of laser power supply current, until the view to the laser output. 5, regulate output mirror knob, make the output laser flare to reach the most beautiful, Round, on average) 。 If, in the process of recuperation and laser is too strong, should be properly reduce the laser power supply current, so as not to damage the fluorescent into pieces. 7, remove the beam expander, see if you recuperate good spot from the output of the hole in the middle of the front plate, if not all applications when the mirror up and down two button and output mirror button to stop nursing, regulate the note on the knob of the two frames, next to the next. For example: you now laser to lower right, then you should first application and output full mirror, mirror on the button in the same direction twist laser to the center of the front plate hole up and down, the next step is to twist all the frames and output under the frame of the button control spot around the center, so as not to laser to recuperate. 8, has allowed center, then it let light can reach the most beautiful. 9, the beam expander lens mount, again let out of light as it passes through the center. Anyhow, fiber laser marking machine equipment in the factory before laser marking vendors would basically will be provided according to the customer early marking needs to adjust to the most beautiful state, conditions usually can be adjusted again. If the after using for a long time or vibration, the production needs, human factors makes the laser light effect becomes poor, or because the request to adjust the laser marking, requires the above steps to adjust. Optical fiber laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. 【 Semiconductor laser marking machine 】 Stable performance, price moderate 【 Green laser marking machine 】 High prices, product customization is given priority to YAG laser marking machine 】 Metal, plastic and other products used for moderate price more fiber laser marking equipment, laser marking machine marking machine debugging
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...