China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img



desk top type water dispenser

The new horizontal design of box bag filling machine is lightweight, convenient and automatic

by:J&D WATER     2020-03-01
The new horizontal design of the bag-in-box filling machine is light and convenient, and it can be automatically pumped. For the paste with large viscosity, it can be added to the hopper. Manual and automatic switching function: when the machine is in the 'automatic' state, the machine will automatically and continuously fill at the set speed. And when the machine is in'Manual' State, the operator steps on the pedal to realize filling, if you keep stepping on it, it will also become an automatic continuous filling state. Anti-drip filling system: when filling, the cylinder moves up and down to drive the stuffy head. The process of liquid filling machine is generally: the boxes with empty bottles are stacked on the tray, and the conveyor belt is sent to the unloader, and the trays are unloaded one by one. The boxes are sent to the unloader with the conveyor belt, take the empty bottle out of the box, and the empty box is sent to the washing machine through the conveyor belt. After cleaning, it is sent to the packing machine, so that the bottle containing the beverage can be loaded into it. The empty bottles taken out from the unloader are sent to the bottle washing machine by another conveyor belt for disinfection and cleaning. After being inspected by the bottle inspection machine, they meet the cleaning standards and then enter the filling machine and capping machine. The beverage is loaded into the bottle by the filling machine. The bottles filled with drinks are sealed by the capping machine and delivered to the labeling machine for labeling. After labeling, the bottles are sent to the packing machine to be loaded into the box and then sent to the stacking tray machine to be stacked on the tray and sent to the warehouse. Use, maintenance and installation 1. Because this filling machine is an automatic machine, the sizes of easy-to-pull bottles, bottle pads and bottle caps are required to be uniform. 2. Before driving, you must use the shaking handle to turn the machine to see if there is any abnormality in its rotation, and then you can drive again if it is normal. 3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large a tool or too hard to disassemble the parts so as not to damage the parts or affect the performance of the machine. 4. Every time the machine is adjusted, the loose screw must be tightened. After turning the machine with a shaking handle to see if its action meets the requirements, you can drive. 5. The machine must be kept clean. It is strictly forbidden to have oil stain, liquid medicine or glass debris on the machine to avoid damage to the machine. Therefore, it must be: (1) during the production process of the machine, timely removal of liquid medicine or glass debris. (2) before the shift, the surface of the machine should be cleaned once, and clean lubricating oil should be added to each activity department. (3) it should be scrubbed once a week, especially in places that are not easy to clean in normal use or blown with compressed air.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...