China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img

 

 +86-0755-88321071

 +86-13823281855
desk top type water dispenser

The processing technology of the triad filling machine

by:J&D WATER     2020-03-12
Small make up and you talk a triad filling machine processing technology, have below small make up to introduce the triad filling machine. As you all know, choose a product or service, from the triad filling machine processing, service, quality and so on various aspects to understand. Triad filling machine empty bottles was turned, by pulling out of the bottle to bottle washing machine. Bottle washing machine of wheel is equipped with bottle clamp. Bottle clamping bottle, along a guide rail turn 180 degrees, make the bottle down into the bottle washing machine. In a particular area of the blunt bottle machine, special nozzle rinsing water, wash bottle inside. After the irrigation and drainage, the bottle is bottle clamping, rotate it 180 degree along the guide rail, bottle up. Wash bottle bottle by the star wheel output and conveying to the filling machine. Enter the bottle by the bottleneck board keep filling machine and stick on the bottle. Populated by back filling. Triad filler craft: the bottle through the air transportation channel, and then, through the bottle sent to the triad in the machine. To install rack in the rotation in the bottle washing machine, bottle clamping on the bottle, along a guide rail turn 180 degrees, make the bottle down. In a particular area of bottle washing machine, washing bottle clamp nozzle water for washing bottle, purifying water filling machine to wash the inner wall of the bottle. After the irrigation and drainage, the bottle is bottle clamping, rotate it 180 degree along the guide rail, bottle up. Wash bottle bottle by the star wheel output and conveying to the filling machine. In a filling machine into the three bottle of water purification were bottleneck tray clamp and the CAM lift. Filling valve is then open bottle. Filled by gravity filling. After open the fill valve, through the filling valve complete material filling process. After filling, bottle drips from the filling valve, the bottle, through the card neck transition into the capping machine. Knife blocks on the cover to keep the bottleneck, to keep the bottle upright, prevent rotation. Rotate and in blocks on the LIDS. Under the action of CAM, implements the cover, cover, cover, cover, the blocks to complete the whole process. The finished product bottle, through the discharge from the capping machine transferred to the bottle of transmission chain, triad machine from the transmission chain. After using triad filling machine, should pay attention to maintenance, at the same time remove the piston and screw, so as not to affect other process requirements. Before piston type filling machine cleaning, clean the remaining product in filling machine, and then with a soft cleaning fluid filling barrel. Cylinder has been lubrication when you leave the factory. Please do not open or add any lubricating oil, to ensure that the filler surface clean sanitation, and in turn it off when not working. In addition, at the same time of maintenance and the correct use of filling machine, but also regularly test, debug, and only in this way, triad filling machine for their healthy and stable work. Above is the content of the processing technology of the triad filling machine, by the jiangsu new source machinery co. , LTD. To provide you with. Company always adhere to the standardized management, put in front of the production quality and the service policy, to provide customers with gratified triad filling machine products and services.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...