China's Leading Beverage Bottling Equipment Manufacturer

ShenZhen J&D Drinking Water Equipment Co., Ltd.

ZhangJiaGang  J&D  Packing  Machinery  Co.,  Ltd.

application-bottle filling machine- blow moulding machine- water treatment equipment-JD WATER-img



desk top type water dispenser

The removal of galvanometer laser marking machine installation

by:J&D WATER     2020-03-24
Laser marking machine to use after a period of time, there may be a laser marking machine can't normal marking, or no problem such as light, after our carefully screening, discovery is vibration shot out of the question. At this time we need to remove the galvanometer, send to the manufacturer or the specified maintenance to do maintenance, after maintenance. Also need to install the galvanometer, this article is mainly from remove the galvanometer and installing galvanometer to write two ways. Remove the galvanometer, complete the following steps: 1, in the case of a power guarantee completely, open marking head into the electric power line connection, if some styles do not have this joint can be ignored. 2, split off the mirror, and make protection and built, operating process, fingers and other any items can not collision to mirror, especially the lens. 3, the use of hardware tools, usually for an internal Angle pickpockets, unscrewed the marking head, careful, in case the outside shell is removed by driving plate connected to a galvanometer, prevent pulling force. 4, unplug all wires, power lines, signal lines, the line motor to the driver board. 5, remove the driver board and packaging, and then remove the Y motor, and X motor, and pay attention to pack. Will drive plate and bundled up X and Y motor, then it's off to remove the galvanometer task, you can send to repair. Install the galvanometer, complete the following steps: 1, the first installation and X Y motor motor, and ensure that any Angle of the two cases, can't crash into each other as well. 2, two driver board is installed. 3, even after all the attachment, test and debug vibration motor Angle and depth of the lens, to ensure that the final laser output center as the center of the field lens. 4, clear up the attachment and tidy up the length of the wire, etc. , all the lid on the header box again. 5, good external connection wires, can restart, the laser printer galvanometer installation is completed. This tutorial is suitable for, all series of laser marking machine. Laser marking equipment recommended: preferential deals offer 4007001618 【 Optical fiber laser marking equipment 】 Mainly used for metal and non-metallic laser marking part USES, tags and beautiful, fast, no material; 【 CO2 laser marking equipment 】 Non-metallic products used for the laser marking purposes; 【 Uv laser marking equipment 】 Adopt import uv laser, it is mainly used for metal and non-metallic products fine marking purposes; 【 Metal laser marking equipment 】 Based on customer specific products, production line, the demand for design and production and customer demand, customized models. More metal laser marking equipment, laser marking machines, laser marking
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...